Max2024 다운로드 및 설치 방법 Vray설치

 

 

 

네이버 블로그에 자세히 올려놨습니다

 

https://blog.naver.com/ygw804/223204034305

Max 2024 다운로드 및 설치 방법 (+Vray)

Vray는 조만간 제가 먼저 설치해보고 업로드 해보겠습니다.

 

 

 

https://makeanything.autodesk.com/3dsmax/2024-1-2597-7346TQ.html

https://makeanything.autodesk.com/3dsmax/2024-1-2597-7346TQ.html

3ds Max 2024.1 Update Release Notes

Welcome to the 3ds Max 2024.1 Update. You can access the Update from your Autodesk Account.

These release notes describe any known limitations, issues, and fixes included in this release. To learn about the new features and updated workflows, see What's New in 3ds Max 2024.1.

3ds Max 2024 new features and enhancements

3ds Max 2024 system requirements

3ds Max 2024 installation and licensing

What's Fixed

Animation

Resolved an issue with the Morpher modifier where it was using the modifier selection instead of the channel selection. This could result in scenes created in previous versions of 3ds Max having their Morpher data not play back as expected. This fix will also make it easier to animate blendshapes / morphs with controls through the modifier. MAXX-72288

Resolved a crash that can occur when parenting an Biped Xtra Bone to a Biped Nub object. Xtras are now blocked from being parented to the nub objects. MAXX-46028

Resolved a crash that could occur when objects or controllers with note tracks in the curve editor or dopesheet were cloned and then the user attempts to undo the clone action. MAXX-71111

Fixed an issue with the Offset Controller where it was not updating the transform matrix caching after it was applied, which would result in its animation data not displaying correctly in the viewport. Users no longer need to use the work around of reloading their scene or using Undo & Redo to see the animation data of the Offset Controller applied. MAXX-72358

Fixed an issue where when the user is driving the vertex deformation of the Skin Modifier with an animated Spline object instead of bones, the object would not update properly in the viewport when the frame changes unless the object was selected and the modify command panel was active with the Skin modifier selected. This fix is an improved to a resolution that was provided in a previous version of 3ds Max, but still required the listed selection workaround. The user no longer requires a special selection condition for the vertex deformation of the Skin modifier to be driven properly by splines. MAXX-72762

Fixed a crash that could occur when animating a part of the Biped that uses an IK Target and your active time range does not start at frame 0. This issue occurs in the Transform Matrix cache when animation data needs to be reevaluated but the active time range does not match the reevaluation interval. MAXX-72320

Resolved a crash when using a Link Constraint and its linkParams parameter. MAXX-71436

Optimized the Bezier controllers and the TCB Rotation controller to be more performant when editing or setting multiple keys at one time through maxscript (such as baking keys per frame). Additional improvements have also been made to the performance of the TCB controllers tangent reevaluation whenever a key on this controller is modified. MAXX-72628

When using the Biped Dope Sheet we have resolved a crash that could occur when extending or sliding a footstep past the last footstep; as well as fixed a regression where sliding, extending footsteps were causing crashes. MAXX-71928

Resolved a crash that could occur when attempting to undo a "Delete Selected Animation" command that was applied to Biped objects, Bones, Link Constraints, and other 3ds Max objects. MAXX-45226

Fixed an issue with the Curve Editor where the Isolate Curve button was not properly updating it's state when active. MAXX-71164

Color Management

Color Management: Output Defaults will now filter Views based on Display as expected MAXX-72788

Fixed incorrect Color Management>Preference UI when loading OCIO files with long names (view transform etc...) MAXX-72730

Core

Fixed issue where only the first UI element associated with parameters assigned the same controller were updated when the parameter value was changed. MAXX-72524

In 2023 the functionality was added to allow environment variables to be declared in a 3ds Max Plugin Package. However, if our pipeline has some environment variable that is shared for all of our packages, we are unable to update it more than once. We now allow for the environment variable to appended or pre-pended to as many times as needed. Removing however is still blocked for variables already defined in a package MAXX-72259

Fixed issue with node name numbering when cloning nodes with a very large number (214748364765564 or greater) at the end of the node name. MAXX-72469

Fixed issue with loading of application packages that specify a Components type that is not one the predefined types. If the Components entry should not be handled due to SeriesMin/SeriesMax, no error message should be generated that the Components type is not recognized. MAXX-73042

Fix crash when importing files, or doing drag and drop of file, where path name >= 260 characters MAXX-72440

Fixed issue with Viewport Selection Brackets being set to on during File / Reset MAXX-72627

Fixed a bug where custom attributes with a function that used keyword "this" would trigger a syntax error. MAXX-72208

Fix crash when saving bitmap files with path name >= 260 characters MAXX-71228

Fix crash when exporting files with path name >= 260 characters MAXX-68270

File IO

3ds Max will no longer send an error message to Render Message window when right clicking on a xref asset entry in Asset Tracker. MAXX-73024

When doing SaveNodes or Save Selected, the saved scene material lib will contain only the materials on those nodes and those otherwise used (such as by Material Editor). MAXX-71097

MAXScript

We've improved the performance with deep copy on some data types. We've also added a new flag copyAllValuesAsUnique. When set to true deepcopy will use the faster legacy method. It will run faster as all values will be copied as unique and we will not check for duplicate values in a list. MAXX-72207

Fixed 'fileProperties.getNumProperties #contents' to properly handle properties added before/after saving a scene file. MAXX-72122

ignoreSSSEState: now defaults to false for safeExecute, safeReadValue, safeReadExpr MAXX-72952

Material Editors

Optimized SME Preview caching, to avoid unnecessary rendering on nodes inside a Compound each time the Compound is opened. MAXX-72875

Modeling

Fixed an issue with Shell so that it will no longer incorrectly weld the UV data from the geometric data that it creates together, making non-manifold UV data. The UV data would then cause a problem with Unfold3D Peel that could result in memory consumption and 3ds Max eventually crashing. This adjustment has been versioned so that it will not affect existing scenes loaded into 3ds Max (so as to not affect any existing customer data) and will only be applied to new Shell modifiers that are applied. MAXX-73253

Resolved an issue with the Boolean Modifier where a set of objects that were contained into a group were not loaded properly as an operand. MAXX-72685

Resolved a crash that could occur in the Boolean Modifier if the user deleted all of the operands from the Operands List. An additional fix was made to resolve a crash that could occur in the Undo/Redo stack when removing operands from the Operands List in the Boolean Modifier. MAXX-73230

Fixed an issue with Volume Select where the OSL Map that it uses would not display in the viewport if the Material Editor was not open MAXX-70064

If the Path Deform spline path is smaller than the size of the Object that is being deformed, the object will no longer disappear. This fix applies to both the World and Object Space versions of the modifier. MAXX-72330

Phyllotaxis distribution options now properly respect the command panel width MAXX-73053

Resolved an issue with the Boolean Modifier where having a Union operation as the very last Operation in your list, could result in vertices created from another operation done earlier in the Operands List (such as a Split and Attach) becoming unintentionally merged MAXX-72808

Non water tight operands in a Boolean operation have a higher degree chance of causing failures with its operand, or subsequent boolean operands. To help notify the user of potential problems the UI will now display an "!" on any operands that are detected as not being water tight, to help the user know that the operand might have an issue. MAXX-72631

Resolved an issue where the results of the Boolean Modifier could generate physically small elements that also had a very small number of faces. These tiny faces could create issues with subsequent Boolean operations or modifiers and as such these tiny elements are now cleaned up in the resulting Boolean Modifier output. MAXX-71795

Fixed a defect in Editable Spline and Edit Spline modifier where the New Vertex Type parameter was not being respected in Create Line and Vertex/Segment Insert modes: In Create Line mode, regardless of the New Vertex Type setting, new spline vertices were being created with the Corner type. In Insert mode, regardless of the New Vertex Type setting, if the spline was originally created with the Line primitive, any inserted vertices would use the "Initial Type" specified in the Line object's original "Creation Method" setting. If the spline was created via other methods, such as a Circle, Rectangle or other shape, vertices created with the Insert mode would be Corner type. These modes now create any new vertices in Create Line and Insert modes according to the New Vertex Type setting. MAXX-72733

When using the Array Modifiers Surface distribution options, users can now "Center By:" in the Arrange by Elements options. MAXX-73033

Resolve an issue when using the Array Modifier's Spline distribution type where "Arrange by Elements" "Randomization" type would not randomize elements across Y and Z values. MAXX-73034

Improved Normalize Spline modifier so that it will better respect the incoming spline curve data as it rebuilds the spline, eliminating unexpected results that could be generated. This fix has been versioned so that it will only apply to new applications of the Normalize Spline and not affect scenes that already utilize the modifier. MAXX-72630

Phyllotaxis distribution with the Array modifier will now utilized the local pivot for the mesh. MAXX-72345

Fixed a performance issue with the Array modifier when using vertex animation data contained in the source mesh MAXX-72297

Resolved an issue with the Boolean Modifier where attempting to apply several Split Operations one after another could result in an operation that does not process properly. MAXX-72365

Adding Meshsmooth to a Line curve object that is not set to "renderable" in the viewport will no longer throw an exception warning to the user MAXX-71634

Fixed a small memory leak that was occurring with the Array modifiers Phyllotaxis distribution method MAXX-72372

The Boolean Modifier can now applying operations to "hollow" objects with results that meet expectations of the user MAXX-72095

Resolved an issue with the Operand List scroll menu with the Boolean modifier where the position in the scroll window would reset after making a change an operand that would update the UI. MAXX-72023

Improved support for explicit normals retention when using the Turn to Poly, Vol. Select, Mesh Select, MaterialByElement, UVW Mapping Clear ,UVW Mapping Add and Select By Channel modifiers on a Mesh class object. Explicit Normals are now supported on a Mesh class object when using the Maxscript call modifiersEdit_Normals.EditNormalsMod.MakeExplicit () A bug with MNFace::Insert was fixed which could affect Specified Normals when you are adding normals due to a topology change. MAXX-72435

Fixed an issue where operand objects with animation data or animated parameters could cause 3ds Max to lockup when using the Boolean Modifiers OpenVDB mode. This fix prevents 3ds Max from freezing, but the animation data of the operand will not affect the boolean. MAXX-73663

Rendering

Fixed a crash produced when opening a scene containing an OSL Uber Bitmap/OSL Bitmap Lookup loading a UDIM sequence. MAXX-73374

Fixed Color Picker sending incorrect OnCancel() notification when pressing OK. MAXX-73093

Fixed artifacts in the viewport and rendering when using OSL. The issue can happen when using OSL nodes and Legacy Bitmap in the same material tree. MAXX-68354

PNG files can now be saved as 8-bit Greyscale again as expected. MAXX-72465

Colors shown in the color picker now match the colors shown in the UI allowing easier customization of UI colors. MAXX-47196

Viewport Canvas settings can be saved and loaded. Fixed MXS exception. MAXX-40319

Scene Converter

Fixed a possible crash when converting a scene with the Scene Converter tool, and then trying to open the Environment& Effects UI. MAXX-71174

Viewport Transfer

DoF based on Physical Camera>Custom>Focus Distance is correct in the viewport. Rendered images and sequences saved from Quicksilver and Arnold are also correct. MAXX-54627

Fixed incorrect loop reset when reducing the number of materials in a Multi-Sub material applied to an object. MAXX-71803

Fixed issue with MaxScript when setting a region with ActiveShade in the viewport. MAXX-72758